SnowLoadCheck

Anson County, NC Roof Snow Load - 10 psf

What ASCE 7 says about snow load in Anson County

Light
10 psf

That's Anson County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. Flat and low-pitch roofs in Anson County are actually governed by ASCE 7's §7.3.4 minimum of 10 psf, not the 7 psf the ground-load formula alone would produce.

Converted to something you can actually eyeball on a roof: about 22 in. of fresh powder, 8 in. once it settles and packs down, or just 2 in. if it's turned to ice. This is a modest add-on to standard roof loading - ordinary residential construction carries it without extra bracing.

Anson County in numbers

Where Anson County's figure sits nationally

Out of 2,758 rated US counties, Anson County sits at #1,890, the top 69% nationally - #84 of 100 within North Carolina. 12.9 psf is North Carolina's typical county figure - Anson County comes in 2.9 psf under it.

Near 34.975°N 80.1098°W, FIPS 37007: Anson County counts 22,432 residents and a 10 psf map value, which the code's own factors turn into 10 psf.

How much it actually snows in Anson County

Most winters bring Anson County roughly 3.2 in. of snow - NOAA's normal at WADESBORO, NC US, 2.1 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Anson County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Anson County's county-wide figure. Details: the calculation guide.