Atascosa County, TX Roof Snow Load - 5 psf
Atascosa County, TX roof snow load, translated
A typical heated home in Atascosa County is designed to carry 5 pounds per square foot of snow on its roof, per ASCE 7-22. §7.3.4's low-slope minimum of 5 psf is what actually governs on a flat or low-pitch roof here - higher than the 3.5 psf the base ground-load formula gives.
On a roof that means 11 in. of fresh snow, 4 in. once it packs down, or 1 in. of solid ice - three very different piles for the same load. A modest addition to standard roof loading. Ordinary residential construction handles this without extra bracing.
Atascosa County in numbers
- Design roof snow load5 psf
- Ground snow load, ASCE 7 map5 psf
- National rank#2,189 of 2,758
- Texas rank#91 of 254
- Population52,783
- Annual snowfall, NOAA normal0 in.
- FIPS48013
Where Atascosa County ranks
#91 of 254 Texas counties by design load, top 79% of 2,758 nationally - that's Atascosa County's spot. That's 0.4 psf below Texas's own county-average design load of 5.4 psf.
FIPS 48013, population 52,783, centered near 28.8915°N 98.5354°W. ASCE 7's underlying ground snow load here is 5 psf before the code's exposure and importance factors bring it to the 5 psf design figure above.
Atascosa County: average annual snowfall
Atascosa County sees about 0 in. of snow most winters, per the JOURDANTON, TX US station's 1991-2020 NOAA normal. See the density guide.
Read this before you use Atascosa County's figure
The figure above assumes the case ASCE 7-22 treats as typical: a heated, ordinary-occupancy home on a partially exposed site. Change any of those - exposure, heating, roof pitch, occupancy category - and the real design number moves.
A building permit needs the number at your exact address, not the county average - the free ASCE 7 Hazard Tool returns that from your coordinates in about a minute and produces a PDF a plan reviewer will accept. (How this figure is calculated.)