Bailey County, TX Roof Snow Load - 15 psf
How much snow is too much for a roof in Bailey County, TX?
15 psf: that's what ASCE 7-22 requires a typical heated home's roof in Bailey County to carry. Flat and low-pitch roofs in Bailey County are actually governed by ASCE 7's §7.3.4 minimum of 15 psf, not the 10.5 psf the ground-load formula alone would produce.
Picture it, not just weigh it: 33 in. if it's fresh powder, 12 in. once it settles, or a mere 3 in. if it's ice. A meaningful design load. Most homes built to modern code handle it, but additions, carports, and flat-roofed sections are worth a second look.
Bailey County, TX: quick facts
- Design roof snow load15 psf
- Ground snow load, ASCE 7 map15 psf
- National rank#1,587 of 2,758
- Texas rank#17 of 254
- Population7,031
- Annual snowfall, NOAA normal5.2 in.
- FIPS48017
How Bailey County compares
15 psf ranks #1,587 of 2,758 US counties with a mapped snow load (top 58%) - and #17 of 254 in Texas. 5.4 psf is Texas's typical county figure - Bailey County beats it by 9.6 psf.
Population 7,031 (FIPS 48017), roughly 34.0675°N 102.8303°W. The 15 psf ground snow load ASCE 7-22 maps here becomes 15 psf once the code's own design factors are applied.
Typical snowfall in Bailey County, TX
NOAA's 30-year normal for Bailey County: 5.2 in. of snow a year, from the ARCH, NM US station. (fresh vs. packed vs. ice explains why.)
What this Bailey County figure assumes
This is a county-level reference figure for a typical heated home built to Risk Category II (ordinary residential), on a partially exposed lot - the assumptions ASCE 7-22 itself treats as the default case. A steeper roof, a fully exposed hilltop lot, an unheated structure, or a higher risk category all change the actual number.
Bailey County's permit office wants an address-specific figure, not this county average - the ASCE 7 Hazard Tool is free, takes under a minute, and outputs a PDF most reviewers accept. See the methodology guide.