Breckinridge County, KY Roof Snow Load - 15 psf
Breckinridge County, KY: your roof's ASCE 7 snow number, in plain English
Breckinridge County's roofs are built to hold 15 psf of snow, the ASCE 7-22 figure a permit reviewer checks first. §7.3.4's low-slope minimum of 15 psf is what actually governs on a flat or low-pitch roof here - higher than the 10.5 psf the base ground-load formula gives.
In depth, not weight: that's roughly 33 inches of fresh, light snow, 12 inches of old, settled snow, or as little as 3 inches of solid ice - snow that heavy is rare here but ice from a freeze-thaw cycle adds up far faster than the depth suggests. Modern-code homes carry a load like this without issue; an older addition, a carport, or any flat-roofed section is where it is worth checking first.
Breckinridge County at a glance
- Design roof snow load15 psf
- Ground snow load, ASCE 7 map15 psf
- National rank#1,460 of 2,758
- Kentucky rank#61 of 120
- Population21,221
- Annual snowfall, NOAA normal4.4 in.
- FIPS21027
Breckinridge County by the numbers
Nationally that's #1,460 out of 2,758 rated counties, the top 53%; within Kentucky alone, Breckinridge County ranks #61 of 120. 15.7 psf is Kentucky's typical county figure - Breckinridge County comes in 0.7 psf under it.
Breckinridge County, FIPS 21027, is home to 21,221 people near 37.778°N 86.4329°W. Its 15 psf ground snow load figure is the map value; 15 psf is what a roof is actually designed for.
Breckinridge County's snowfall, most winters
4.4 in. a year: that's Breckinridge County's NOAA 1991-2020 snowfall normal, measured at ROUGH RVR LAKE, KY US (11.7 mi away). See the density guide.
Before you rely on Breckinridge County's number
Treat the Breckinridge County figure as a starting point, not a final answer: it assumes standard occupancy, a heated structure and a moderately sheltered site, per ASCE 7-22's own defaults. Exposed terrain, an unheated building or a steeper roof all shift the real number.
For a real application, skip the county number and go straight to the ASCE 7 Hazard Tool - enter your coordinates and it returns a site-specific figure a plan reviewer will recognize. (How this figure is calculated.)