SnowLoadCheck

Bryan County, OK Roof Snow Load - 5 psf

What ASCE 7 says about snow load in Bryan County

Light
5 psf

That's Bryan County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. §7.3.4's low-slope minimum of 5 psf is what actually governs on a flat or low-pitch roof here - higher than the 3.5 psf the base ground-load formula gives.

Converted to something you can actually eyeball on a roof: about 11 in. of fresh powder, 4 in. once it settles and packs down, or just 1 in. if it's turned to ice. Standard residential construction handles a load this size without extra bracing; it is a modest addition on top of ordinary roof loading.

Got real snow on a Bryan County roof right now?

in. of

Bryan County at a glance

Where Bryan County's figure sits nationally

Out of 2,758 rated US counties, Bryan County sits at #2,194, the top 80% nationally - #73 of 77 within Oklahoma. That's 6 psf below Oklahoma's own county-average design load of 11 psf.

Near 33.964°N 96.2651°W, FIPS 40013: Bryan County counts 50,305 residents and a 5 psf map value, which the code's own factors turn into 5 psf.

How much it actually snows in Bryan County

Most winters bring Bryan County roughly 2 in. of snow - NOAA's normal at DURANT, OK US, 6.4 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Bryan County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Bryan County's county-wide figure. See the methodology guide.