SnowLoadCheck

Chickasaw County, IA Roof Snow Load - 24.5 psf

What ASCE 7 says about snow load in Chickasaw County

Moderate
24.5 psf

That's Chickasaw County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from.

Converted to something you can actually eyeball on a roof: about 53.9 in. of fresh powder, 19.6 in. once it settles and packs down, or just 4.9 in. if it's turned to ice. Modern-code homes carry a load like this without issue; an older addition, a carport, or any flat-roofed section is where it is worth checking first.

Chickasaw County in numbers

Where Chickasaw County's figure sits nationally

Out of 2,758 rated US counties, Chickasaw County sits at #354, the top 13% nationally - #20 of 99 within Iowa. That's 2.8 psf above Iowa's own county-average design load of 21.7 psf.

Near 43.0597°N 92.3172°W, FIPS 19037: Chickasaw County counts 11,719 residents and a 35 psf map value, which the code's own factors turn into 24.5 psf.

How much it actually snows in Chickasaw County

Most winters bring Chickasaw County roughly 38.5 in. of snow - NOAA's normal at NEW HAMPTON, IA US, 1 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Chickasaw County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Chickasaw County's county-wide figure. See the methodology guide.