SnowLoadCheck

Collin County, TX Roof Snow Load - 5 psf

Collin County, TX: your roof's ASCE 7 snow number, in plain English

Light
5 psf

Collin County's roofs are built to hold 5 psf of snow, the ASCE 7-22 figure a permit reviewer checks first. Flat and low-pitch roofs in Collin County are actually governed by ASCE 7's §7.3.4 minimum of 5 psf, not the 3.5 psf the ground-load formula alone would produce.

In depth, not weight: that's roughly 11 inches of fresh, light snow, 4 inches of old, settled snow, or as little as 1 inches of solid ice - snow that heavy is rare here but ice from a freeze-thaw cycle adds up far faster than the depth suggests. Standard residential construction handles a load this size without extra bracing; it is a modest addition on top of ordinary roof loading.

Already snow on the roof in Collin County?

in. of

Collin County in numbers

Collin County by the numbers

Nationally that's #2,072 out of 2,758 rated counties, the top 75%; within Texas alone, Collin County ranks #44 of 254. That's 0.4 psf below Texas's own county-average design load of 5.4 psf.

Collin County, FIPS 48085, is home to 1,254,658 people near 33.1945°N 96.5794°W. Its 5 psf ground snow load figure is the map value; 5 psf is what a roof is actually designed for.

Collin County's snowfall, most winters

2.6 in. a year: that's Collin County's NOAA 1991-2020 snowfall normal, measured at FRISCO, TX US (12.4 mi away). See the density guide.

Before you rely on Collin County's number

Treat the Collin County figure as a starting point, not a final answer: it assumes standard occupancy, a heated structure and a moderately sheltered site, per ASCE 7-22's own defaults. Exposed terrain, an unheated building or a steeper roof all shift the real number.

For a real application, skip the county number and go straight to the ASCE 7 Hazard Tool - enter your coordinates and it returns a site-specific figure a plan reviewer will recognize. See the methodology guide.