SnowLoadCheck

Conway County, AR Roof Snow Load - 10 psf

What ASCE 7 says about snow load in Conway County

Light
10 psf

That's Conway County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. 7 psf is what the ground-load formula alone gives; Conway County's 10 psf low-slope minimum (§7.3.4) beats it, so that figure is the one that governs on flat and low-pitch roofs.

Converted to something you can actually eyeball on a roof: about 22 in. of fresh powder, 8 in. once it settles and packs down, or just 2 in. if it's turned to ice. A modest addition to standard roof loading. Ordinary residential construction handles this without extra bracing.

Conway County, AR: quick facts

Where Conway County's figure sits nationally

Out of 2,758 rated US counties, Conway County sits at #1,899, the top 69% nationally - #30 of 75 within Arkansas. 10.1 psf is Arkansas's typical county figure - Conway County comes in 0.1 psf under it.

Near 35.2657°N 92.6892°W, FIPS 05029: Conway County counts 21,422 residents and a 10 psf map value, which the code's own factors turn into 10 psf.

How much it actually snows in Conway County

Most winters bring Conway County roughly 4.4 in. of snow - NOAA's normal at CENTER RIDGE 3 S, AR US, 8.5 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Conway County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Conway County's county-wide figure. Details: the calculation guide.