Dawson County, NE Roof Snow Load - 20 psf
Dawson County, NE: your roof's ASCE 7 snow number, in plain English
Dawson County's roofs are built to hold 20 psf of snow, the ASCE 7-22 figure a permit reviewer checks first. ASCE 7's low-slope-roof minimum (§7.3.4) raises the governing figure to 20 psf - higher than the 17.5 psf the ground-load formula alone would give, and the code says use the larger one.
In depth, not weight: that's roughly 44 inches of fresh, light snow, 16 inches of old, settled snow, or as little as 4 inches of solid ice - snow that heavy is rare here but ice from a freeze-thaw cycle adds up far faster than the depth suggests. Modern-code homes carry a load like this without issue; an older addition, a carport, or any flat-roofed section is where it is worth checking first.
Dawson County at a glance
- Design roof snow load20 psf
- Ground snow load, ASCE 7 map25 psf
- National rank#913 of 2,758
- Nebraska rank#26 of 93
- Population24,554
- Annual snowfall, NOAA normal20 in.
- FIPS31047
Dawson County by the numbers
Nationally that's #913 out of 2,758 rated counties, the top 33%; within Nebraska alone, Dawson County ranks #26 of 93. That's 0.2 psf below Nebraska's own county-average design load of 20.2 psf.
Dawson County, FIPS 31047, is home to 24,554 people near 40.8678°N 99.8156°W. Its 25 psf ground snow load figure is the map value; 20 psf is what a roof is actually designed for.
Dawson County's snowfall, most winters
20 in. a year: that's Dawson County's NOAA 1991-2020 snowfall normal, measured at CANADAY STEAM PLT, NE US (13.4 mi away). See the density guide.
Before you rely on Dawson County's number
Treat the Dawson County figure as a starting point, not a final answer: it assumes standard occupancy, a heated structure and a moderately sheltered site, per ASCE 7-22's own defaults. Exposed terrain, an unheated building or a steeper roof all shift the real number.
For a real application, skip the county number and go straight to the ASCE 7 Hazard Tool - enter your coordinates and it returns a site-specific figure a plan reviewer will recognize. (How this figure is calculated.)