SnowLoadCheck

Giles County, TN Roof Snow Load - 10 psf

What ASCE 7 says about snow load in Giles County

Light
10 psf

That's Giles County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. 7 psf is what the ground-load formula alone gives; Giles County's 10 psf low-slope minimum (§7.3.4) beats it, so that figure is the one that governs on flat and low-pitch roofs.

Converted to something you can actually eyeball on a roof: about 22 in. of fresh powder, 8 in. once it settles and packs down, or just 2 in. if it's turned to ice. This is a modest add-on to standard roof loading - ordinary residential construction carries it without extra bracing.

Giles County at a glance

Where Giles County's figure sits nationally

Out of 2,758 rated US counties, Giles County sits at #1,837, the top 67% nationally - #51 of 95 within Tennessee. 10.3 psf is Tennessee's typical county figure - Giles County comes in 0.3 psf under it.

Near 35.2027°N 87.0353°W, FIPS 47055: Giles County counts 30,971 residents and a 10 psf map value, which the code's own factors turn into 10 psf.

How much it actually snows in Giles County

Most winters bring Giles County roughly 1.9 in. of snow - NOAA's normal at PULASKI WWTP, TN US, 1.3 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Giles County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Giles County's county-wide figure. (How this figure is calculated.)