SnowLoadCheck

Glenn County, CA Roof Snow Load - 5 psf

What ASCE 7 says about snow load in Glenn County

Light
5 psf

That's Glenn County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. Flat and low-pitch roofs in Glenn County are actually governed by ASCE 7's §7.3.4 minimum of 5 psf, not the 3.5 psf the ground-load formula alone would produce.

Converted to something you can actually eyeball on a roof: about 11 in. of fresh powder, 4 in. once it settles and packs down, or just 1 in. if it's turned to ice. A modest addition to standard roof loading. Ordinary residential construction handles this without extra bracing.

Snow on Glenn County's roofs right now?

in. of

Glenn County in numbers

Where Glenn County's figure sits nationally

Out of 2,758 rated US counties, Glenn County sits at #2,243, the top 81% nationally - #4 of 41 within California. 1.1 psf is California's typical county figure - Glenn County beats it by 3.9 psf.

Near 39.6025°N 122.4017°W, FIPS 06021: Glenn County counts 28,304 residents and a 5 psf map value, which the code's own factors turn into 5 psf.

How much it actually snows in Glenn County

Most winters bring Glenn County roughly 0 in. of snow - NOAA's normal at STONY GORGE RSVR, CA US, 7.1 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Glenn County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Glenn County's county-wide figure. See the methodology guide.