SnowLoadCheck

Goshen County, WY Roof Snow Load - 15 psf

How much snow is too much for a roof in Goshen County, WY?

Moderate
15 psf

15 psf: that's what ASCE 7-22 requires a typical heated home's roof in Goshen County to carry. §7.3.4's low-slope minimum of 15 psf is what actually governs on a flat or low-pitch roof here - higher than the 10.5 psf the base ground-load formula gives.

Picture it, not just weigh it: 33 in. if it's fresh powder, 12 in. once it settles, or a mere 3 in. if it's ice. A meaningful design load. Most homes built to modern code handle it, but additions, carports, and flat-roofed sections are worth a second look.

Goshen County, WY: quick facts

How Goshen County compares

15 psf ranks #1,528 of 2,758 US counties with a mapped snow load (top 55%) - and #13 of 18 in Wyoming. That's 2.5 psf below Wyoming's own county-average design load of 17.5 psf.

Population 12,635 (FIPS 56015), roughly 42.0895°N 104.3535°W. The 15 psf ground snow load ASCE 7-22 maps here becomes 15 psf once the code's own design factors are applied.

Typical snowfall in Goshen County, WY

NOAA's 30-year normal for Goshen County: 31.2 in. of snow a year, from the TORRINGTON EXP FARM, WY US station. (fresh vs. packed vs. ice explains why.)

What this Goshen County figure assumes

This is a county-level reference figure for a typical heated home built to Risk Category II (ordinary residential), on a partially exposed lot - the assumptions ASCE 7-22 itself treats as the default case. A steeper roof, a fully exposed hilltop lot, an unheated structure, or a higher risk category all change the actual number.

Goshen County's permit office wants an address-specific figure, not this county average - the ASCE 7 Hazard Tool is free, takes under a minute, and outputs a PDF most reviewers accept. Details: the calculation guide.