Jasper County, GA Roof Snow Load - 5 psf
Jasper County, GA: your roof's ASCE 7 snow number, in plain English
Jasper County's roofs are built to hold 5 psf of snow, the ASCE 7-22 figure a permit reviewer checks first. 3.5 psf is what the ground-load formula alone gives; Jasper County's 5 psf low-slope minimum (§7.3.4) beats it, so that figure is the one that governs on flat and low-pitch roofs.
In depth, not weight: that's roughly 11 inches of fresh, light snow, 4 inches of old, settled snow, or as little as 1 inches of solid ice - snow that heavy is rare here but ice from a freeze-thaw cycle adds up far faster than the depth suggests. This is a modest add-on to standard roof loading - ordinary residential construction carries it without extra bracing.
Jasper County in numbers
- Design roof snow load5 psf
- Ground snow load, ASCE 7 map5 psf
- National rank#2,323 of 2,758
- Georgia rank#73 of 159
- Population17,219
- Annual snowfall, NOAA normal0.6 in.
- FIPS13159
Jasper County by the numbers
Nationally that's #2,323 out of 2,758 rated counties, the top 84%; within Georgia alone, Jasper County ranks #73 of 159. That's 1.4 psf above Georgia's own county-average design load of 3.6 psf.
Jasper County, FIPS 13159, is home to 17,219 people near 33.317°N 83.6892°W. Its 5 psf ground snow load figure is the map value; 5 psf is what a roof is actually designed for.
Jasper County's snowfall, most winters
0.6 in. a year: that's Jasper County's NOAA 1991-2020 snowfall normal, measured at MONTICELLO, GA US (1.2 mi away). See the density guide.
Before you rely on Jasper County's number
Treat the Jasper County figure as a starting point, not a final answer: it assumes standard occupancy, a heated structure and a moderately sheltered site, per ASCE 7-22's own defaults. Exposed terrain, an unheated building or a steeper roof all shift the real number.
For a real application, skip the county number and go straight to the ASCE 7 Hazard Tool - enter your coordinates and it returns a site-specific figure a plan reviewer will recognize. See the methodology guide.