Jasper County, MO Roof Snow Load - 15 psf
Jasper County, MO: your roof's ASCE 7 snow number, in plain English
Jasper County's roofs are built to hold 15 psf of snow, the ASCE 7-22 figure a permit reviewer checks first. Flat and low-pitch roofs in Jasper County are actually governed by ASCE 7's §7.3.4 minimum of 15 psf, not the 10.5 psf the ground-load formula alone would produce.
In depth, not weight: that's roughly 33 inches of fresh, light snow, 12 inches of old, settled snow, or as little as 3 inches of solid ice - snow that heavy is rare here but ice from a freeze-thaw cycle adds up far faster than the depth suggests. This is a meaningful design load - most modern-code homes handle it fine, though an addition, a carport or a flat-roofed section can be a weak spot.
Got real snow on a Jasper County roof right now?
Jasper County at a glance
- Design roof snow load15 psf
- Ground snow load, ASCE 7 map15 psf
- National rank#1,336 of 2,758
- Missouri rank#86 of 115
- Population126,479
- Annual snowfall, NOAA normal7.8 in.
- FIPS29097
Jasper County by the numbers
Nationally that's #1,336 out of 2,758 rated counties, the top 48%; within Missouri alone, Jasper County ranks #86 of 115. That's 3.6 psf below Missouri's own county-average design load of 18.6 psf.
Jasper County, FIPS 29097, is home to 126,479 people near 37.2052°N 94.3373°W. Its 15 psf ground snow load figure is the map value; 15 psf is what a roof is actually designed for.
Jasper County's snowfall, most winters
7.8 in. a year: that's Jasper County's NOAA 1991-2020 snowfall normal, measured at WACO 4N, MO US (15.8 mi away). See the density guide.
Before you rely on Jasper County's number
Treat the Jasper County figure as a starting point, not a final answer: it assumes standard occupancy, a heated structure and a moderately sheltered site, per ASCE 7-22's own defaults. Exposed terrain, an unheated building or a steeper roof all shift the real number.
For a real application, skip the county number and go straight to the ASCE 7 Hazard Tool - enter your coordinates and it returns a site-specific figure a plan reviewer will recognize. (How this figure is calculated.)