SnowLoadCheck

Keith County, NE Roof Snow Load - 20 psf

What ASCE 7 says about snow load in Keith County

Moderate
20 psf

That's Keith County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. ASCE 7's low-slope-roof minimum (§7.3.4) raises the governing figure to 20 psf - higher than the 17.5 psf the ground-load formula alone would give, and the code says use the larger one.

Converted to something you can actually eyeball on a roof: about 44 in. of fresh powder, 16 in. once it settles and packs down, or just 4 in. if it's turned to ice. A meaningful design load. Most homes built to modern code handle it, but additions, carports, and flat-roofed sections are worth a second look.

Keith County, NE: quick facts

Where Keith County's figure sits nationally

Out of 2,758 rated US counties, Keith County sits at #1,148, the top 42% nationally - #43 of 93 within Nebraska. Nebraska counties average 20.2 psf; Keith County runs 0.2 psf lower than that.

Near 41.1942°N 101.6444°W, FIPS 31101: Keith County counts 8,148 residents and a 25 psf map value, which the code's own factors turn into 20 psf.

How much it actually snows in Keith County

Most winters bring Keith County roughly 22 in. of snow - NOAA's normal at WALLACE 2W, NE US, 33.2 mi off. That station is far enough away (33.2 mi) that local snowfall - especially at a different elevation or near a lake - can run noticeably higher or lower than this figure. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Keith County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Keith County's county-wide figure. Details: the calculation guide.