Kingman County, KS Roof Snow Load - 15 psf
Kingman County, KS: your roof's ASCE 7 snow number, in plain English
Kingman County's roofs are built to hold 15 psf of snow, the ASCE 7-22 figure a permit reviewer checks first. ASCE 7's low-slope-roof minimum (§7.3.4) raises the governing figure to 15 psf - higher than the 10.5 psf the ground-load formula alone would give, and the code says use the larger one.
In depth, not weight: that's roughly 33 inches of fresh, light snow, 12 inches of old, settled snow, or as little as 3 inches of solid ice - snow that heavy is rare here but ice from a freeze-thaw cycle adds up far faster than the depth suggests. Modern-code homes carry a load like this without issue; an older addition, a carport, or any flat-roofed section is where it is worth checking first.
Kingman County, KS: quick facts
- Design roof snow load15 psf
- Ground snow load, ASCE 7 map15 psf
- National rank#1,588 of 2,758
- Kansas rank#87 of 105
- Population6,946
- Annual snowfall, NOAA normal8.9 in.
- FIPS20095
Kingman County by the numbers
Nationally that's #1,588 out of 2,758 rated counties, the top 58%; within Kansas alone, Kingman County ranks #87 of 105. That's 3.2 psf below Kansas's own county-average design load of 18.2 psf.
Kingman County, FIPS 20095, is home to 6,946 people near 37.553°N 98.1445°W. Its 15 psf ground snow load figure is the map value; 15 psf is what a roof is actually designed for.
Kingman County's snowfall, most winters
8.9 in. a year: that's Kingman County's NOAA 1991-2020 snowfall normal, measured at KINGMAN, KS US (6.5 mi away). See the density guide.
Before you rely on Kingman County's number
Treat the Kingman County figure as a starting point, not a final answer: it assumes standard occupancy, a heated structure and a moderately sheltered site, per ASCE 7-22's own defaults. Exposed terrain, an unheated building or a steeper roof all shift the real number.
For a real application, skip the county number and go straight to the ASCE 7 Hazard Tool - enter your coordinates and it returns a site-specific figure a plan reviewer will recognize. (How this figure is calculated.)