Lebanon County, PA Roof Snow Load - 21 psf
What ASCE 7 says about snow load in Lebanon County
That's Lebanon County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from.
Converted to something you can actually eyeball on a roof: about 46.2 in. of fresh powder, 16.8 in. once it settles and packs down, or just 4.2 in. if it's turned to ice. This is a meaningful design load - most modern-code homes handle it fine, though an addition, a carport or a flat-roofed section can be a weak spot.
Lebanon County in numbers
- Design roof snow load21 psf
- Ground snow load, ASCE 7 map30 psf
- National rank#411 of 2,758
- Pennsylvania rank#11 of 38
- Population145,319
- Annual snowfall, NOAA normal24 in.
- FIPS42075
Where Lebanon County's figure sits nationally
Out of 2,758 rated US counties, Lebanon County sits at #411, the top 15% nationally - #11 of 38 within Pennsylvania. That's 0.1 psf above Pennsylvania's own county-average design load of 20.9 psf.
Near 40.3714°N 76.4648°W, FIPS 42075: Lebanon County counts 145,319 residents and a 30 psf map value, which the code's own factors turn into 21 psf.
How much it actually snows in Lebanon County
Most winters bring Lebanon County roughly 24 in. of snow - NOAA's normal at LEBANON 2 W, PA US, 2.6 mi off. (fresh vs. packed vs. ice explains why.)
Read this before you rely on it
Lebanon County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.
Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Lebanon County's county-wide figure. See the methodology guide.