SnowLoadCheck

Lee County, TX Roof Snow Load - 5 psf

What ASCE 7 says about snow load in Lee County

Light
5 psf

That's Lee County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. 3.5 psf is what the ground-load formula alone gives; Lee County's 5 psf low-slope minimum (§7.3.4) beats it, so that figure is the one that governs on flat and low-pitch roofs.

Converted to something you can actually eyeball on a roof: about 11 in. of fresh powder, 4 in. once it settles and packs down, or just 1 in. if it's turned to ice. This is a modest add-on to standard roof loading - ordinary residential construction carries it without extra bracing.

Lee County, TX: quick facts

Where Lee County's figure sits nationally

Out of 2,758 rated US counties, Lee County sits at #2,311, the top 84% nationally - #136 of 254 within Texas. 5.4 psf is Texas's typical county figure - Lee County comes in 0.4 psf under it.

Near 30.3215°N 96.9768°W, FIPS 48287: Lee County counts 18,451 residents and a 5 psf map value, which the code's own factors turn into 5 psf.

How much it actually snows in Lee County

Most winters bring Lee County roughly 0.2 in. of snow - NOAA's normal at FEDOR 3SE, TX US, 4 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Lee County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Lee County's county-wide figure. Details: the calculation guide.