SnowLoadCheck

Lincoln County, OR Roof Snow Load - 5 psf

What ASCE 7 says about snow load in Lincoln County

Light
5 psf

That's Lincoln County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. ASCE 7's low-slope-roof minimum (§7.3.4) raises the governing figure to 5 psf - higher than the 3.5 psf the ground-load formula alone would give, and the code says use the larger one.

Converted to something you can actually eyeball on a roof: about 11 in. of fresh powder, 4 in. once it settles and packs down, or just 1 in. if it's turned to ice. This is a modest add-on to standard roof loading - ordinary residential construction carries it without extra bracing.

Lincoln County, OR: quick facts

Where Lincoln County's figure sits nationally

Out of 2,758 rated US counties, Lincoln County sits at #2,193, the top 80% nationally - #15 of 15 within Oregon. That's 7 psf below Oregon's own county-average design load of 12 psf.

Near 44.6411°N 123.9112°W, FIPS 41041: Lincoln County counts 51,212 residents and a 5 psf map value, which the code's own factors turn into 5 psf.

How much it actually snows in Lincoln County

Most winters bring Lincoln County roughly 0.1 in. of snow - NOAA's normal at NEWPORT, OR US, 7.1 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Lincoln County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Lincoln County's county-wide figure. See the methodology guide.