SnowLoadCheck

Linn County, KS Roof Snow Load - 20 psf

Linn County, KS: your roof's ASCE 7 snow number, in plain English

Moderate
20 psf

Linn County's roofs are built to hold 20 psf of snow, the ASCE 7-22 figure a permit reviewer checks first. ASCE 7's low-slope-roof minimum (§7.3.4) raises the governing figure to 20 psf - higher than the 14 psf the ground-load formula alone would give, and the code says use the larger one.

In depth, not weight: that's roughly 44 inches of fresh, light snow, 16 inches of old, settled snow, or as little as 4 inches of solid ice - snow that heavy is rare here but ice from a freeze-thaw cycle adds up far faster than the depth suggests. Modern-code homes carry a load like this without issue; an older addition, a carport, or any flat-roofed section is where it is worth checking first.

Linn County, KS: quick facts

Linn County by the numbers

Nationally that's #1,110 out of 2,758 rated counties, the top 40%; within Kansas alone, Linn County ranks #27 of 105. Kansas counties average 18.2 psf; Linn County runs 1.8 psf higher than that.

Linn County, FIPS 20107, is home to 9,841 people near 38.2165°N 94.8449°W. Its 20 psf ground snow load figure is the map value; 20 psf is what a roof is actually designed for.

Linn County's snowfall, most winters

13.5 in. a year: that's Linn County's NOAA 1991-2020 snowfall normal, measured at CENTERVILLE 4SW, KS US (12.5 mi away). See the density guide.

Before you rely on Linn County's number

Treat the Linn County figure as a starting point, not a final answer: it assumes standard occupancy, a heated structure and a moderately sheltered site, per ASCE 7-22's own defaults. Exposed terrain, an unheated building or a steeper roof all shift the real number.

For a real application, skip the county number and go straight to the ASCE 7 Hazard Tool - enter your coordinates and it returns a site-specific figure a plan reviewer will recognize. Details: the calculation guide.