Moultrie County, IL Roof Snow Load - 20 psf
What ASCE 7 says about snow load in Moultrie County
That's Moultrie County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. ASCE 7's low-slope-roof minimum (§7.3.4) raises the governing figure to 20 psf - higher than the 14 psf the ground-load formula alone would give, and the code says use the larger one.
Converted to something you can actually eyeball on a roof: about 44 in. of fresh powder, 16 in. once it settles and packs down, or just 4 in. if it's turned to ice. This is a meaningful design load - most modern-code homes handle it fine, though an addition, a carport or a flat-roofed section can be a weak spot.
Moultrie County at a glance
- Design roof snow load20 psf
- Ground snow load, ASCE 7 map20 psf
- National rank#1,041 of 2,758
- Illinois rank#68 of 102
- Population14,365
- Annual snowfall, NOAA normal15.1 in.
- FIPS17139
Where Moultrie County's figure sits nationally
Out of 2,758 rated US counties, Moultrie County sits at #1,041, the top 38% nationally - #68 of 102 within Illinois. That's 0.7 psf above Illinois's own county-average design load of 19.3 psf.
Near 39.6369°N 88.6257°W, FIPS 17139: Moultrie County counts 14,365 residents and a 20 psf map value, which the code's own factors turn into 20 psf.
How much it actually snows in Moultrie County
Most winters bring Moultrie County roughly 15.1 in. of snow - NOAA's normal at LOVINGTON, IL US, 5.2 mi off. (fresh vs. packed vs. ice explains why.)
Read this before you rely on it
Moultrie County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.
Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Moultrie County's county-wide figure. See the methodology guide.