SnowLoadCheck

Oconee County, GA Roof Snow Load - 5 psf

Oconee County, GA: your roof's ASCE 7 snow number, in plain English

Light
5 psf

Oconee County's roofs are built to hold 5 psf of snow, the ASCE 7-22 figure a permit reviewer checks first. The physics-based figure alone would be 3.5 psf, but ASCE 7's own low-slope minimum (§7.3.4) sets a floor of 5 psf for flat and low-pitch roofs here, which is the number that actually governs.

In depth, not weight: that's roughly 11 inches of fresh, light snow, 4 inches of old, settled snow, or as little as 1 inches of solid ice - snow that heavy is rare here but ice from a freeze-thaw cycle adds up far faster than the depth suggests. Standard residential construction handles a load this size without extra bracing; it is a modest addition on top of ordinary roof loading.

Oconee County at a glance

Oconee County by the numbers

Nationally that's #2,200 out of 2,758 rated counties, the top 80%; within Georgia alone, Oconee County ranks #49 of 159. That's 1.4 psf above Georgia's own county-average design load of 3.6 psf.

Oconee County, FIPS 13219, is home to 44,751 people near 33.8341°N 83.4377°W. Its 5 psf ground snow load figure is the map value; 5 psf is what a roof is actually designed for.

Oconee County's snowfall, most winters

0 in. a year: that's Oconee County's NOAA 1991-2020 snowfall normal, measured at U OF GA PLT SCI, GA US (6.2 mi away). See the density guide.

Before you rely on Oconee County's number

Treat the Oconee County figure as a starting point, not a final answer: it assumes standard occupancy, a heated structure and a moderately sheltered site, per ASCE 7-22's own defaults. Exposed terrain, an unheated building or a steeper roof all shift the real number.

For a real application, skip the county number and go straight to the ASCE 7 Hazard Tool - enter your coordinates and it returns a site-specific figure a plan reviewer will recognize. Details: the calculation guide.