Oneida County, WI Roof Snow Load - 42 psf
What ASCE 7 says about snow load in Oneida County
That's Oneida County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from.
Converted to something you can actually eyeball on a roof: about 92.4 in. of fresh powder, 33.6 in. once it settles and packs down, or just 8.4 in. if it's turned to ice. A serious structural load. Homes built before modern snow-load provisions, or with low-slope/flat roof sections, are the ones most worth having checked.
Oneida County in numbers
- Design roof snow load42 psf
- Ground snow load, ASCE 7 map60 psf
- National rank#36 of 2,758
- Wisconsin rank#4 of 72
- Population38,175
- Annual snowfall, NOAA normal81.6 in.
- FIPS55085
Where Oneida County's figure sits nationally
Out of 2,758 rated US counties, Oneida County sits at #36, the top 1% nationally - #4 of 72 within Wisconsin. That's 11.1 psf above Wisconsin's own county-average design load of 30.9 psf.
Near 45.7162°N 89.5345°W, FIPS 55085: Oneida County counts 38,175 residents and a 60 psf map value, which the code's own factors turn into 42 psf.
How much it actually snows in Oneida County
Most winters bring Oneida County roughly 81.6 in. of snow - NOAA's normal at RHINELANDER WJFW TV-12, WI US, 8.8 mi off. (fresh vs. packed vs. ice explains why.)
Read this before you rely on it
Oneida County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.
Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Oneida County's county-wide figure. See the methodology guide.