SnowLoadCheck

Pecos County, TX Roof Snow Load - 5 psf

What ASCE 7 says about snow load in Pecos County

Light
5 psf

That's Pecos County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. §7.3.4's low-slope minimum of 5 psf is what actually governs on a flat or low-pitch roof here - higher than the 3.5 psf the base ground-load formula gives.

Converted to something you can actually eyeball on a roof: about 11 in. of fresh powder, 4 in. once it settles and packs down, or just 1 in. if it's turned to ice. This is a modest add-on to standard roof loading - ordinary residential construction carries it without extra bracing.

Pecos County at a glance

Where Pecos County's figure sits nationally

Out of 2,758 rated US counties, Pecos County sits at #2,338, the top 85% nationally - #144 of 254 within Texas. 5.4 psf is Texas's typical county figure - Pecos County comes in 0.4 psf under it.

Near 30.7733°N 102.7182°W, FIPS 48371: Pecos County counts 14,712 residents and a 5 psf map value, which the code's own factors turn into 5 psf.

How much it actually snows in Pecos County

Most winters bring Pecos County roughly 0.4 in. of snow - NOAA's normal at SHEFFIELD, TX US, 53.2 mi off. That station is far enough away (53.2 mi) that local snowfall - especially at a different elevation or near a lake - can run noticeably higher or lower than this figure. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Pecos County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Pecos County's county-wide figure. See the methodology guide.