Pipestone County, MN Roof Snow Load - 35 psf
What ASCE 7 says about snow load in Pipestone County
That's Pipestone County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from.
Converted to something you can actually eyeball on a roof: about 77 in. of fresh powder, 28 in. once it settles and packs down, or just 7 in. if it's turned to ice. This is a serious structural load - older homes built before modern snow-load provisions, or ones with low-slope or flat roof sections, are worth having checked.
Pipestone County at a glance
- Design roof snow load35 psf
- Ground snow load, ASCE 7 map50 psf
- National rank#183 of 2,758
- Minnesota rank#75 of 87
- Population9,100
- Annual snowfall, NOAA normal40.4 in.
- FIPS27117
Where Pipestone County's figure sits nationally
Out of 2,758 rated US counties, Pipestone County sits at #183, the top 7% nationally - #75 of 87 within Minnesota. 37.4 psf is Minnesota's typical county figure - Pipestone County comes in 2.4 psf under it.
Near 44.0154°N 96.257°W, FIPS 27117: Pipestone County counts 9,100 residents and a 50 psf map value, which the code's own factors turn into 35 psf.
How much it actually snows in Pipestone County
Most winters bring Pipestone County roughly 40.4 in. of snow - NOAA's normal at FLANDREAU, SD US, 16.9 mi off. (fresh vs. packed vs. ice explains why.)
Read this before you rely on it
Pipestone County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.
Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Pipestone County's county-wide figure. See the methodology guide.