SnowLoadCheck

Pitt County, NC Roof Snow Load - 10 psf

What ASCE 7 says about snow load in Pitt County

Light
10 psf

That's Pitt County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. The physics-based figure alone would be 7 psf, but ASCE 7's own low-slope minimum (§7.3.4) sets a floor of 10 psf for flat and low-pitch roofs here, which is the number that actually governs.

Converted to something you can actually eyeball on a roof: about 22 in. of fresh powder, 8 in. once it settles and packs down, or just 2 in. if it's turned to ice. A modest addition to standard roof loading. Ordinary residential construction handles this without extra bracing.

Pitt County in numbers

Where Pitt County's figure sits nationally

Out of 2,758 rated US counties, Pitt County sits at #1,685, the top 61% nationally - #58 of 100 within North Carolina. 12.9 psf is North Carolina's typical county figure - Pitt County comes in 2.9 psf under it.

Near 35.5925°N 77.3727°W, FIPS 37147: Pitt County counts 180,783 residents and a 10 psf map value, which the code's own factors turn into 10 psf.

How much it actually snows in Pitt County

Most winters bring Pitt County roughly 3.3 in. of snow - NOAA's normal at GREENVILLE, NC US, 3.6 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Pitt County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Pitt County's county-wide figure. (How this figure is calculated.)