SnowLoadCheck

Prowers County, CO Roof Snow Load - 10 psf

What ASCE 7 says about snow load in Prowers County

Light
10 psf

That's Prowers County's design roof snow load per ASCE 7-22, for a typical heated single-family home - the number a permit reviewer starts from. ASCE 7's low-slope-roof minimum (§7.3.4) raises the governing figure to 10 psf - higher than the 7 psf the ground-load formula alone would give, and the code says use the larger one.

Converted to something you can actually eyeball on a roof: about 22 in. of fresh powder, 8 in. once it settles and packs down, or just 2 in. if it's turned to ice. A modest addition to standard roof loading. Ordinary residential construction handles this without extra bracing.

Prowers County in numbers

Where Prowers County's figure sits nationally

Out of 2,758 rated US counties, Prowers County sits at #1,982, the top 72% nationally - #20 of 24 within Colorado. That's 7.7 psf below Colorado's own county-average design load of 17.7 psf.

Near 37.9584°N 102.3918°W, FIPS 08099: Prowers County counts 11,957 residents and a 10 psf map value, which the code's own factors turn into 10 psf.

How much it actually snows in Prowers County

Most winters bring Prowers County roughly 21.5 in. of snow - NOAA's normal at HOLLY, CO US, 15.6 mi off. (fresh vs. packed vs. ice explains why.)

Read this before you rely on it

Prowers County's number above is ASCE 7-22's default case, not a custom calculation: ordinary residential occupancy, heated, sited on ground that's neither fully sheltered nor fully exposed. Any one of those changing - pitch, exposure, heating, occupancy - moves the real figure.

Nothing here substitutes for an address-level number. Get one free, in about a minute, from the ASCE 7 Hazard Tool using your own coordinates rather than Prowers County's county-wide figure. See the methodology guide.