SnowLoadCheck

Wabash County, IN Roof Snow Load - 20 psf

Wabash County, IN: your roof's ASCE 7 snow number, in plain English

Moderate
20 psf

Wabash County's roofs are built to hold 20 psf of snow, the ASCE 7-22 figure a permit reviewer checks first. Flat and low-pitch roofs in Wabash County are actually governed by ASCE 7's §7.3.4 minimum of 20 psf, not the 14 psf the ground-load formula alone would produce.

In depth, not weight: that's roughly 44 inches of fresh, light snow, 16 inches of old, settled snow, or as little as 4 inches of solid ice - snow that heavy is rare here but ice from a freeze-thaw cycle adds up far faster than the depth suggests. This is a meaningful design load - most modern-code homes handle it fine, though an addition, a carport or a flat-roofed section can be a weak spot.

Wabash County in numbers

Wabash County by the numbers

Nationally that's #856 out of 2,758 rated counties, the top 31%; within Indiana alone, Wabash County ranks #44 of 89. Indiana counties average 19.3 psf; Wabash County runs 0.7 psf higher than that.

Wabash County, FIPS 18169, is home to 30,777 people near 40.8437°N 85.7952°W. Its 20 psf ground snow load figure is the map value; 20 psf is what a roof is actually designed for.

Wabash County's snowfall, most winters

30.3 in. a year: that's Wabash County's NOAA 1991-2020 snowfall normal, measured at N MANCHESTER WWTP, IN US (10.4 mi away). See the density guide.

Before you rely on Wabash County's number

Treat the Wabash County figure as a starting point, not a final answer: it assumes standard occupancy, a heated structure and a moderately sheltered site, per ASCE 7-22's own defaults. Exposed terrain, an unheated building or a steeper roof all shift the real number.

For a real application, skip the county number and go straight to the ASCE 7 Hazard Tool - enter your coordinates and it returns a site-specific figure a plan reviewer will recognize. Details: the calculation guide.